Preheating Plate T-8120
Products Features
1.The machine selects the infrared highly effective component to give off heat which independent exploration, adopt advanced PID intelligent controlling warm heating technology, controls warm precisely.
2. Can achieve to heat PCB board and component which contains lead or not , suit for BGA/SMD.
3. Use infrared heat, easy to cut through, heat proportion, don’t have sirocco flow. Don’t shift the small component on the PCB board，ensure the welding quality.
4. This machine has 600W heating system, widely to 120x120mm.Can use with the handhold infrared welder T-835.
5. Easily operate, can operate it through easy training.
Technical Parameter
|
Work size |
200x240mm |
|
Rated voltage and frequency |
AC220-230v/AC110V |
|
Complete machine power |
800W |
|
Preheating chassis power |
600W |
|
Preheating chassis size |
120x120mm |
|
Preheating chassis temperature adjustable |
0-450℃ |
Main Components
|
Preheating plate main body |
1 |
|
Temperature sensor |
1 |
|
PCB board holder |
1 |
|
Power line |
1 |
|
User manual (compact disc) |
1 |
Operation instructions
1. Inspect the machine and then open it
① Check the connection of the power line.
② Turn on the power line. Don’t use until passing check. (The nixie tube displays the indoor temperature.)
③ The black switch on the front panel are used to control the infrared preheating plate; press the blue button"▲" (up), the red button"▼" (down), can be at 0-450℃, adjust the infrared preheating chassis's temperature. Press the button "WARM", the infrared preheating chassis starts to work, press "COOL", it stops working.
2. Operation of preheating PCB board
(1) PCB board's placement and adjustment:
① According to the PCB board’s size, adjust the location of the board support, put the PCB board on the support and fix the screw tightly with hands. Make the temperature measurement head fixed on the PCB board which needs to preheating, use aluminum-foil paper or adhesive paper to stick tightly.
② According to the size of PCB board and welding technological requirement, press "▲" and "▼" button, between 0℃ and 450℃, regulate the output temperature of preheating chassis.
(2) Preheating opening and closure:
① Press the "WARM" button，open the preheating chassis about 3-5 minutes, make the temperature be about the setting value then carry on the step operation.
② After finishing, press "COOL", the preheating chassis stop working. Attention: This time can’ t close the power switch, after the machine full cooling then close the power source.
③ General preheating temperature establishment suggestion: when PCB board has lead ,may adjust the infrared preheating chassis temperature to 100-120℃; When PCB board has non-lead, may adjust to 120-140℃; Also may set the different preheating temperature voluntarily according to user's use craft and experience.
Cautions
1. After finishing, don’t turn off the power immediately; make the infrared preheating chassis full cooling.
2. Keep the ventilation free-flowing, the infrared preheating chassis pure; use the dehydrated alcohol to be clean regularly!
3. Careful, the high temperature operation, pay attention, avoids scalding.
4. Long-time doesn’t use, should cramp out the power source plug!
Guarantee acceptance
The complete machine maintains for one year and lifelong service. Long-term factory price supply. Provides the immediate network online Q/A and the technical advisory work service.
Statement
Between user operating manual and actual product different place, take actual product as!
